We are SSL.

Enter DPP Home HOME

Contact   Check Out  GO-Back 


By part
Click for details

   

-5400 (Click the Cyber Deals logo to view the current promotions).

Deluxe mill package--Vertical Mill w/ 12" solid aluminum base (~38Lb)

   

US$ 783.00    

The deluxe 5400-series mill is the most popular mill. It comes equipped with all of Sherline’s standard features upgraded to include a laser engraved 12" (305mm) solid aluminum base for 2" or additional Y-axis travel, laser engraved scales on the table and base, 2-1/2" (63mm) adjustable “zero” handwheel on the Z-axis and 2" (51mm) adjustable “zero” handwheels on the X- and Y-axes, a mill headstock spacer (P/N 1297) to provide more throat distance and a 1/4" drill chuck and drawbolt (P/N 3072).

All Sherline mills feature precision machined dovetailed slides with adjustable gibs, permanently lubricated spindle bearings, adjustable preload anti-backlash feed screws and a high-torque 90 VDC motor with electronic speed control. Speed is continuously variable from 70 to 2800 RPM without gear or belt changes. A second pulley position is also available to provide extra torque at low RPM if needed.

An additional $80 worth of accessories plus 2" more Y-axis travel and the convenience of laser engraved reference scales make the additional $100.00 over the cost of a basic Model 5000/5100 a very good buy.

OTHER OPTIONS: The 5400/5410 mill can be ordered with P/N 8100 digital readout already installed. Standard handwheels are not included because they are replaced by the DRO handwheels. The mill can also be ordered in "CNC ready" configuration ready for the application of stepper motors and CNC controls. In this configuration the standard handwheels are supplied so that they can be used on the rear shaft of a dual shaft stepper motor for optional manual control.

Sherline's Mills variety Specifications

FEATURE

5000(5100)

5400(5410)

2000 (2010)

Max clearance, table to spindle

8.00" (203 mm)

8.00" (203 mm)

9.00" (229 mm)

Throat (without headstock spacer) 2.25" (50 mm) 2.25" (50 mm) Adjustable
Throat (with headstock spacer block) (Not included) Included, 3.50" (89 mm)  Not Required
Travel, "X" Axis

9.00" (228 mm)

9.00" (228 mm)

9.00" (229 mm)

Travel, "Y" Axis

3.00" (76 mm)

5.00" (127 mm)

7.00" (178 mm)

Travel, "Z" Axis

6.25" (159 mm)

6.25" (159 mm).

5.38" (137 mm)

Hole through spindle

.405" (10 mm)

.405" (10 mm)

.405 (10 mm)

Spindle nose thread

3/4-16 T.P.I.

3/4-16 T.P.I.

3/4-16 T.P.I.

Spindle taper

#1 Morse

#1 Morse.

#1 Morse

Handwheel graduations

.001" (.01 mm)

.001" (.01 mm)

.001" (.01 mm)

Width overall*

14.75" (375 mm)

15.00" (381 mm)

15.00 (381 mm)

Depth overall*

11.75" (298 mm)

14.00" (356 mm)

22.25" (565 mm)

Height overall*

20.75" (527 mm)

20.75" (527 mm)

23.38" (568 mm)

Table size

2.75" x 13.00" (70 x 330 mm)

2.75" x 13.00" (70 x 330 mm)

2.75" x 13.00" (70 x 330 mm)

Hold down provision

2 "T" Slots

2 "T" Slots

2 "T" Slots

Shipping weight

33 lb. (15.0 kg)

36 lb. (16.3 kg)

38 lb. (17.2 kg)

Movements in addition to X-, Y- and Z-axes

Headstock rotation 90° left/right

Headstock rotation 90° left/right

Headstock rotation 90° left/right, column rotation (90° L/R), column pivot (front/back), column swing (90° L/R) and 5.5" column travel (in/out)

Motor 90 volt DC with electronic speed control automatically converts any input from 100 VAC to 240 VAC, 50 or 60 Hz.
Spindle speed range

70-2800 RPM continuously variable by electronic speed control

(Inch)

(Metric)


5400 Deluxe mill package--Vertical Mill w/ 12" solid aluminum base (~38Lb)