We are SSL.

Enter DPP Home HOME

Contact   Check Out  GO-Back 


By part
Click for details


   

-CNC Extended Box + Accessories. New Release (New digitizing probe) (Click the Cyber Deals logo to view the current promotions).

Extended Box + Switches + Digitizing probe +Estop Switch Improves CNC performance rectifies missteps and misdirections! On Sale Now!

   

US$ 614.72     FREE SHIPPING (USA main land)

If you do not need a Digitizing probe to be included click here.

The Extended CNC controller box contains signal drivers with Z state buffers that comply with the required IEEE 1284 type a signal level. It amplifies and therefore enhances the quality of the step and direction signals from the parallel port and thus, rectifies weak signal problems by delivering the proper signal level that any general purpose four axis CNC controllers such as the Sherline’s 8760 requires. The latter addresses often problems such as miss steps, single directional motion etc.

In addition, the extended box enables to add limits/home switches a Digitizing probe an Emergency stop switch and has an expansion port with additional buffered 4 outputs +V and ground.

All the inputs and outputs have drivers for lower signal enhancement and furthermore, feature a high Z state for a better isolation for the CNC controller and the operating computer. The limit switches and the probe inputs pins are not used by the 8760 CNC controller and therefore, are physically disconnected from it. They are also fully buffered to protect the computer parallel printer inputs.
The unit comes with all the cables and accessories you need to connect swiftly to the Sherline’s 8760 controller.

1. Mechanical switches will easily connect to the extended box via the RJ45 cable. The Switches get activated when the moving project will touch them. They are relatively easy to mount onto the XYZ axis. A32 Mechanical Switch Assembly to RJ45

LIMIT SWITCHS CONNECTOR

RJ45 PIN

DESCRIPTION

1

GND

2

Z HOME/LIMIT

3

Y HOME/LIMIT

4

X HOME/LIMIT

5

NOT USED

6

NOT USED

7

5V

8

NOT USED

The Digitizing probe is mounted to the spindle via its 3/8" Shank (Spindle motor is off during the digitizing probe operation) the probe cable connects via a jack connector to the extended box. Various CNC software such as MACH3 and others have a probe wizard which generates a three dimensional G code from the probe contacts. This probe can duplicate 3D objects with a reasonable accuracy. Furthermore, the extended box can accommodate a more accurate (and more pricy) probes available at the CNC market. Files being generated by the wizard can also be imported to a CAD software for fine tuning.

The expansion port has an 4 additional outputs (Pins 1,14,16,17,+V and GND) that can control VFD CW/CCW module for a variable spindle speed control as well as on/off relays.

The Emergency Stop Switch connects to pin 10 (DB25P) and will activate the E-stop when either the Red button is pushed or when the user pulls the Switch from the socket

CNC Extended Box + Accessories. New Release (New digitizing probe) Extended Box + Switches + Digitizing probe +Estop Switch <font face="Verdana" size="3" color="#FF0000">Improves CNC performance rectifies missteps and misdirections! </font><font face="Verdana" size="3" color="green">On Sale Now! </font>