The compound slide offers a way to turn tapers and cut angles on a lathe without rotating the headstock. Four mounting holes are provided in the base for stable positioning on the crosslide. The fixed base has a red anodized finish with laser engraved angle scales to make setting an angle easy. It utilizes a highly efficient locking ring design to lock the rotating portion in position without having to over-tighten the locking screws. A 1/4″ cutting tool can be mounted across the front or on either side of the head.
A riser block for the compound is available as P/N 1272. When using the riser block, the cutting tool is reverted to the normal orientation rather than using it upside down.
Unlike compounds used on full-size, conventional lathes, this one was designed to be used from the “back” side of the table. This allows it to be designed in a more compact size and used without interference from the crosslide handwheel. The lathe tool is inserted in the holder “upside down” so the cutting tip faces downward. Because of the small size of the miniature lathe, operating the crosslide handwheel in this position causes no inconvenience.
The Sherline compound slide is available in both inch and metric versions. On the inch version, the handwheel is calibrated in .001″ increments, while on the metric version, the handwheel is calibrated in .01 mm increments.