1-800-621-8334 @DPP

Shipping Direct from Factory!

HOME

Contact _Check_Out _Add_Item:

By part

COMPLETE CLOSE LOOP 3 AND 4 AXIS MOTION CONTROL SYSTEMS WITH 'NEMA 23' SINGLE STACK MOTORS (As used in the MAXNC 10 CL machine)

Powerful motion system set up to be controlled from a standard parallel port from a PC computer, using the included MAXNC CL2 software for "G" code format or using custom software from the user.  Motors are capable of over 1,000 RPM with 1.8 Deg. Shaft resolution.

Includes:

• Controller with power supply.
• 3 or 4 motors with encoders.
• Motor and encoder cables.
• Parallel port cable.
• CL2 driver software for PC computers with manual.
• CL2 software features:
•  "G" & "M" code programming.
• Linear interpolation.
• Circular Interpolation.
• Helical Interpolation.
• Backlash compensation.
• Keyboard jog mode.
• Automatic cycle.
• Line by line cycle.
• Tool length and tool radius compensation table.
• Spindle motor on and off.
• Spindle speed control from program.
• Screen update and acceleration/deceleration inhibit (G64) for un-interrupted contouring, and more.

If the controller is to be used with other driver software, it requires only 2 output line per motor from the parallel port, in a quadrature mode, and 2 input lines total for feedback.  4 axes can be driven with a single port.